2 In 1 Card Reader Portable USB C UHS-I Memory SD And MicroSD Reader For IPad Pro

USB3.0 TYPE-C SD TF Card Reader 2 in 1 SD Memory Card Reader, Extend the storage of your Desktop via the SD , Micro SD card .

Simultaneously read and write on two cards to save yourself the effort of constant unplugging and re-plugging. USB 3.0 enables data transfer rates of up to 104MB/s

Card reader in travel format  and Compact design, ideal for on the go
Supports SD/SDHC/SDXC/microSD/microSDHC/microSDXC cards
Complies with USB 3.2 Gen1 specifications
Transfer rates of up to 5 Gbit/s
Slim and elegant aluminum housing
Plug and play – no driver installation required
Supports hot swap
Supports Android, Chrome OS, Mac OS, Windows and Linux systems
Max. memory card capacity: up to 2 TB

Input: 1x USB-C (male) connector
Output: 1x microSD, 1x SD (can be used simultaneously)

Card reader - two slots, supports the following formats:
• Micro SD slot: microSD / microSDHC / microSDXC / TransFlash,
• SD slot: Secure Digital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with miniSD, microSD, microSDHC, microSDXC, MMC Micro adapter.

This 2 in 1 Memory card Reader is a part of module based on Model UC0181 / UC0182 and UC0183

The reader supports the following flash card specifications:
• SD 1.0 / 1.1 (SD - Secure Digital, up to 2GB).
• SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB).
• SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB).
• MMC and eMMC 3.x / 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit).
• Support for SD 3.01 and SD Jukebox applications (CPRM functions).
• Ultra High Speed UHS-I support (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s.
• Supports ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function.
• 2 LUN - in file managers, the reader is indicated as two disk drives.
• FAT 12 / 16 / 32, NTFS, exFAT (FAT 64) file formats support.

Other features:
• SuperSpeed USB - USB 3.2 Gen 1 interface (before USB 3.1 Gen 1 / USB 3.0).
• Also compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1.
• Supports transmission rates 1.5 / 12 / 480 / 5000 Mbit/s (low / full / high / super speed).
• Full Plug and Play and Hot Swap support.
• Connects via USB type C male or A male connector.
• Support for connection of phones with microUSB connector via OTG adapter.
• USB-bus card reader power supply.
• Dimensions 27.15 x 32 x 12.3 mm with caps attached.
• Net Weight 15 g.

Supported Operating Systems:
• MS Windows XP / Vista / 7/8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (all 32- and 64-bit Windows versions supported), Mac OS X 10.x and higher Linux with 2.4.x kernel and higher, Android all versions.
• Note: Drivers are included with supported operating systems and will be installed automatically.